banner
Blog

Blog

  • Analysis of oil failure of oil injected screw air compressor
    • 2021-07-02

    Generally, the oil content of the compressed air of the oil injected screw air compressor is not more than 3ppm. When the oil content of the compressed air exceeds this standard, we usually call it high fuel consumption, commonly known as running oil or flying oil. Air compressor oil running is a headache problem that has plagued manufacturers, distributors and users for a long time, and it is als...

  • What is the difference between a permanent magnet screw air compressor and a soft starter?
    • 2021-06-18

    Soft Starter Air Compressor:A soft starter is actually a motor control device with motor soft start, soft stop, light load energy saving and multiple protection functions. It is mainly a three-phase parallel thyristor and its electronic control circuit connected in series between the power supply and the controlled motor. By controlling the conduction angle of the three-phase parallel thyristor, t...

  • The principle, characteristics and application fields of PSA oxygen generator
    • 2021-06-18

    The working principle of PSA oxygen generator: The normal air composition is: nitrogen (N2) accounts for about 78.1%, oxygen (O2) accounts for about 20.9%, and rare gases account for about 0.939% (helium He, neon Ne, argon Ar, krypton Kr, xenon Xe, radon Rn), Carbon dioxide (CO2) accounts for about 0.031%, and other gases and impurities account for about 0.03% PSA (Pressure Swing Absorption) oxyge...

  • How does a screw compressor work?
    • 2021-04-08

    The screw compressor cylinder is equipped with a pair of intermeshing spiral female and male rotors. Both rotors have several concave teeth, and the two rotate in opposite directions. The main rotor (also called a male rotor or a convex rotor) is driven by an engine or an electric motor (mostly driven by an electric motor), and the other rotor (also called a female rotor or a female rotor) is driv...

  • Selection Guide for Screw Air Compressor
    • 2021-04-01

    1. Selection of working pressure (exhaust pressure): When the user is preparing to purchase an air compressor, first determine the working pressure required by the air end, plus 1-2 The margin of bar, and then select the pressure of the air compressor, (the margin is to consider the pressure loss from the installation location of the air compressor to the actual gas end pipeline distance, and the ...

  • PSA Oxygen Generator System and Oxygen Flushing Cylinder System Suitable for Hospitals
    • 2021-05-08
    PSA Oxygen Generator System and Oxygen Flushing Cylinder System Suitable for Hospitals

    Air contains 21% oxygen, 78% nitrogen, 0.9% argon and 0.1% other trace gases. PSA oxygen generator uses zeolite molecular sieve as adsorbent. Use two containers with zeolite molecular sieves (two towers, four towers or six towers) as adsorbents, using the principle of pressure adsorption and decompression desorption to adsorb and release oxygen from the air, thereby separating the oxygen from the ...

© Copyright: 2025 Aircompsupplier All Rights Reserved.

IPv6 network supported

top

Leave A Message

Leave A Message

    If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.