• 2023-02-10

When does the air compressor need to be replaced? Let's look at some indicators that may lead to potential demand for air compressor replacement 1. Shutdown A simple indicator of compressor problems is that the compressor is shut down without reason during operation. Depending on the season and weather conditions, your air compressor may shut down due to high ambient temperature and overheating. T...

• 2023-03-31

There are 6 problems with oil in the exhaust of the air compressor, which can be solved in minutes!（2） Troubleshooting Steps When oil is found in the exhaust gas of the direct drive ac compressor, it is not necessary to disassemble the equipment blindly. Instead, analyze the above causes and follow the steps from easy to difficult to determine the location of the fault. This can reduce a lot of re...

• 2023-03-24

There are 6 problems with oil in the exhaust of the air compressor, which can be solved in minutes! Air compressor exhaust oil fault Among compressor faults, exhaust oil fault is the most common, and the main factors causing exhaust oil fault include: 1. Damaged of oil and gas separator During the operation of the air compressor, if  oil and gas separator is damaged, such as damaged or p...

• 2023-03-17

Brief Analysis of Precautions for Compressor Pickling Operation During the operation of a compressor, high exhaust temperature often occurs. One of the main reasons for this problem is that there is some blockage in the pipeline. For example, if the lubrication system is not cleaned for a long time, the gum and dirt in the head of the air compressor can cause a series of problems such as insuffici...

• 2023-03-03

Where should the air compressor in the factory be placed? What are the requirements?(2) 02. oilless compressor placement and design For the installation of compressed air equipment with long pipes, the distribution system wiring shall be carried out. The compressed air equipment is installed near the auxiliary equipment such as pump and fan, which is convenient for repair and maintenance; The...

• 2023-03-02

Where should the air compressor factory be placed? What are the requirements? The compressed air system is generally placed in the compressor room. Generally, there are two cases: one is installed in the same room with other equipment, or it can be a room specially designed for compressed air system. In both cases, the room needs to meet some requirements to facilitate compressor installation and ...

• 2023-02-17

To solve the fuel injection problem of the air compressor inlet valve, you only need to master this! The air inlet valve has the functions of air inlet control, loading and unloading control, capacity adjustment control, unloading, and preventing oil injection during unloading or shutdown. Its operation rules can be summarized as follows: loading when powered on, unloading when powered off. The co...

• 2023-01-06

Working principle of screw air compressor and analysis of working principle of each system 1、 motor system: The single screw air compressor is also called screw air compressor. The meshing pair of the single screw air compressor is composed of a 6-head screw and two 11 tooth star wheels. The worm is engaged with two star gears at the same time, even if the force on the worm is balanced, the displa...