• 2022-10-14

No matter what brand of oil injection air compressor, its compression working principle is the same, and the functions of each valve are roughly the same. If we can thoroughly understand the design function and working principle of each valve, we will give some support and help to solve the common faults of the air compressor! The five major valves of the oil injection air compressor are: unloadin...

• 2022-09-20

The most complete and standard installation specifications and requirements of air compressors can be used as installation manuals! The selection of the air compressor installation site is the most neglected by the staff. Often after the air compressor is purchased, a place is found at will, and it is used immediately after piping. There is no prior planning at all. However, such a sloppy result w...

• 2022-09-20

Analysis of how air compressors can safely survive the high temperature season High temperature alarm in summer is the most common problem. High temperature will lead to increased oil content in the exhaust, increase the consumption of lubricating oil, increase the load of oil removal in the downstream filter or increase the oil content of the air end, which will affect the wear of parts in severe...

• 2022-09-20

As more and more customers begin to care about air quality, the compressed air treatment equipment (referred to as post-treatment equipment) of air compressors has become more and more important. For some special applications, such as food, medicine, precision electronics and other industries, the moisture in the compressed air will not only affect the terminal pipeline, but even have a great impa...

• 2022-08-26

When your customers complain to you about insufficient air volume, do you solve the problem? Or open another machine? Every year, a large number of customers ask us for new equipment, and there are many users. Their demand for buying compressors comes from his internal customers (such as production workshops) who put forward this sharp point to him. Problem: Not enough compressed air. 01. The comp...

• 2022-08-26

There are two 457MCL compressors in the public works of a petrochemical company. During operation, oil leakage occurred due to bearing temperature. Bearing operating temperature is the most comprehensive working parameter among various factors reflecting bearing quality. It reflects the influence of the thermal effects associated with internal friction, rolling, vibration, collision and other fact...

• 2022-08-26

First of all, we need to understand why the screw air compressor accumulates water: 1. When the screw air compressor is running, the compressed air contains condensed water in the atmosphere. During the continuous operation of the machine, after the oil temperature gradually rises to 80°C, the condensed water in the oil begins to volatilize, and the water is discharged with the compressed air. in ...

• 2022-08-05

"Screw Air Compressor Operation and Maintenance Instructions" is a tool for manufacturers to provide after-sales service to users. It is a randomly provided instructional technical information. It can help users understand product characteristics, provide use and maintenance methods, so as to make the product It will give full play to its due functions and achieve the expected service life, s...

• 2022-08-05

Compressed air stations are essential for every plant. During the entire life cycle of being put into use, the cost of purchasing equipment and equipment maintenance only accounts for a small part of the total cost of system operation, while the electricity consumed by the system operation accounts for a small part of the cost. To more than 75% of the total cost of the entire life cycle, so the en...