7.5-250kw Screw Air Compressor Intake Valve

Filter media: filter element adopts many kinds of materials, such as glass fiber, wood pulp filter paper , stainless steel sinter fiber web and stainless steel wire woven. Nominal filtration rating: 0.01μ ~ 1000μ Operating pressure:21bar-210bar (Hydraulic Liquid Filtration) The critical fact for the proper operation of the engine is to keep the lubricating oil clean, or to ensure no corrosive impurity inside the lubrication oil.

Air Oil Separator is a key component that determines the quality of compressed air in screw air compressors. Our Air Oil Separator is made of ultra-fine glass fiber composite filter material, which has high filtration efficiency, long life, high temperature resistance, good oil removal and purification effect, and pressure difference. Low-level features.

Oil Filter is located in the main engine's lubrication system, and its role is to filter out solid particles, magazines, and oily substances in the special oil of the air compressor to protect the safe operation of the main engine.

High Quality Screw Air Compressor Spare Part Baosi Screw Air End  1. The whole series of rotors are processed by KAPP grinder imported from Germany, with high precision and high efficiency. 2. It can be driven by belt or directly connected, and the application is flexible and convenient. 3. The optimized design of the host structure makes the overall structure more compact and beautiful.

The principle of the compressed air filter of an air compressor: the compressed air passes through the filter element, and some solid particles are blocked by the filter element, so that the content of solid particles in the compressed air is reduced, and part of the water is concentrated and removed when it passes through the filter. The filter filters out impurities and oil in the gas to ensure the cleanliness of the incoming gas. The filter filters out solid dust and liquid moisture and oil droplets through the precise spatial network structure of the filter.

PSA is a new type of gas adsorption and separation technology, which has the following advantages: High product purity. It can work at room temperature and common pressure (0.8mpa), without heating during bed regeneration, which is energy-saving and economical. The equipment is easy to operate and maintain. Continuous cycle work can be fully automated. With 5A zeolite molecular sieve adsorbent, a two-bed PSA device is used to separate oxygen enrichment from the air and separate O2 and N2 in the air to obtain nitrogen. Carbon molecular sieve is a kind of ink-colored particles which are specially processed from coal powder. Its surface is covered with numerous micropores. The principle of air separation depends on the different diffusion speeds of oxygen and nitrogen in the pores of carbon molecular sieve. The diffusion speed of oxygen into the pores of molecular sieve is much faster than the diffusion speed of nitrogen, so that oxygen molecules are adsorbed in the pores of carbon molecular sieve. , And nitrogen molecules are enriched in the gas phase. At the same time, the capacity of carbon molecular sieve to adsorb oxygen increases due to its pressure increase, and decreases due to its pressure drop. In this way, the carbon molecular sieve adsorbs when pressurized, and desorbs the oxygen component under reduced pressure, forming a cycle operation to achieve the purpose of separating air. Referred to as PSA Nitrogen.

Diesel Portable Screw Air Compressor Applications: mining, hydropower, oil and gas exploitation, borehole, shipyard, construction, chemical industry, quarry, sandblasting, pipeline pressure test, public works, etc. advantage： 1.Gas Control System: It is simple and reliable. Inlet rate from 0 to 100% and be adjusted automatically depending on the gas consumption. Automatically adjust the engine throttle to save diesel fuel. 2.Microcomputor Intelligent Control: Air compressor discharge pressure, exhaust gas temperature, engine speed, oil pressure, water temperature and fuel tank level operating parameters with automatic alarm and shutdown protection. 3.Multi-Stage Air Filter and Large Oil-Water Cooler: It is not only suitable for dusty work environment, but it is suitable for high temperature and high altitude environment. 4.Parts and Components: They can be maintained within the accesible range which is convenient and easy. 5.Covenient: Easy to move in rough terrain.Each compressor has lifting rings on the top for safe hoisting and transportation.

TUC3016A/B mechanized concrete spraying manipulator is specially designed for spraying concrete projects under difficult construction conditions. Designed to automatically perform wet and dry sprayed concrete construction. This machine is very suitable for slope stabilization or mining and tunnel construction that require small manipulators. The wireless remote control can be used to provide complete mobility and improved safety by allowing the operator to stay away from newly excavated rocks and newly sprayed concrete.